Henry Ford’s soybean car

The Ford soybean car: Scam or hoax? Only 72 years late, Mac’s Motor City Garage rips the lid off the controversy with this probing investigative report. 

 

 

Before he reinvented mass production with the Model T, Henry Ford was raised on a farm in rural Michigan, and in middle age he became fascinated with the notion of merging farming with industry. Much of this effort focused on finding uses for the soybean in manufacturing, with some limited success. However, as with many of Ford’s projects, it can be difficult to separate the reality from the publicity campaign.

Henry Ford takes an ax to an experimental plastic deck lid on a 1941 Ford, demonstaritng its alleged unbreakable properties. 

 

The Ford soybean car of 1941 was so named because its body panels were said to be constructed from a soy-based plastic created in Ford’s soybean laboratory at Greenfield Village in Dearborn. (The building still exists. It’s the gray frame structure on your left as you pass through the Village front gate.) Though no formula survives, Lowell Overly, the Ford employee in charge of the project, said the body material was “soybean fiber in a phenolic resin with formaldehyde used in the impregnation.”

Plastics engineers today scoff at the claim, skeptical that the plastic contained any significant soy material at all. The body panels were more likely a conventional phenolic plastic similar to the stuff we know as Bakelite. Soy-based structural plastics have never proved out to this day.

During the Second World War, license plates in several states were manufactured using soybeans, but the cardboard-like material was so flimsy that few survive. The whole deal also brings to mind Duroplast, the cotton-fiber plastic used to make bodies for the East German Trabant. In recent years, the proponents of hemp production have hijacked Ford’s soybean car to advance their own agenda—with inadvertent comic effect. Makes you wonder what they’ve been smoking.

Ford soybean car chassis

 

But all that’s okay, because the so-called soybean car is interesting in so many other ways, starting with its architecture. Originally designed by Ford styling chief Bob Gregorie assisted by John Najjar, the chassis and integrated body superstructure were constructed from thinwall steel tubing. The 14 molded body panels that made up the car’s skin were hung on this support structure, forming an extremely light, simple assembly. Lightweight plastic windows and a Ford V8-60 drivetrain also helped to keep the weight down, reportedly under 2000 lbs.

Alas, the soybean car is no longer around for us to explore its mysteries. Gregorie had it destroyed, apparently not long after its two known public appearances in the summer of 1941. In the slide show below you’ll find the patent drawings and a selection of photographs.

 

Ford soybean car chassis skeleton right rear
Ford soybean car Fig 1 patent 2,269,452
Lowell Overly with Ford soybean car full view
Ford soybean car chassis right side
Ford soybean car handshake
Ford soybean car chassis right front
Ford soybean car with Henry Ford right
Ford soybean car Fig 2 patent 2,269,452
Ford soybean car chassis right rear
Ford soybean car with Henry Ford in straw hat
Lowell Overly with Ford soybean car
Soybean car frame patent drawing
Henry Ford with axe trunk likd

Ford soybean car chassis skeleton right rear

Ford soybean car Fig 1 patent 2,269,452

Lowell Overly with Ford soybean car full view

Ford soybean car chassis right side

Ford soybean car handshake

Ford soybean car chassis right front

Ford soybean car with Henry Ford right

Ford soybean car Fig 2 patent 2,269,452

Ford soybean car chassis right rear

Ford soybean car with Henry Ford in straw hat

Lowell Overly with Ford soybean car

Soybean car frame patent drawing

Henry Ford with axe trunk likd

Be Sociable, Share!

3 thoughts on “Henry Ford’s soybean car

    • That’s fair to say. While plastic exterior body panels are ubiquitous today, after all these decades they’ve yet to produce a decent soy-based material.

  1. A friend of my father,named Ted Cotora worked on the Soybean project.The process used Formaldahyde which Ted told my father always smelled like a funeral home and that they couldn’t get rid of the smell.Also he said that famous photo of Henry and the ax was the second take.He said the first time the ax ended up in the trunk!They confiscated the film from the cameramen and bolted a second deck lid on.It worked.

Leave a Reply